Products
Daeyeon C&I will be a company that leads the technological culture in the 21st century.
Other Products
These are the other products of Daeyeon C&I.
Product | Item Name | Model Name | Key Function | Features | TYPE | RANGE | RANGE | OUTPUT | POWER |
Water leakage sensor | DY-LD | WATER LEVEL DETECTOR | Water level detection sensor, quick response, low hysteresis | 1: 1layer 2: 2layer 3 : TAPE O : Others | Bar type (1, 2 layers) 1: 100ℓ 2 : 200ℓ 3 : 300ℓ 4 : 400ℓ 5 : 500ℓ 6 : Others | TAPE Type 1: 1M 2 : 2M 3 : 3M 4 : 4M 5 : 5M 6 : Others | 1 : Voltage Pulse 2: Open.C 3 : Dry.C O : Others | Y : 12V DC Z : 24V DC | |
Temperature sensor | DY-HW | 2WIRE TRANSMITTER & PT 100 Ω T/C SENSOR | 2-Wire transmitter and temperature sensor with built-in head | ||||||
Humidity and temperature module | DY-HTT3 | 온습도 원격검침 모듈 | This product measures indoor humidity and temperature for environmental monitoring in data processing and clean rooms and provides the collected data to FMS. | ||||||
Linear temperature sensor communication module | DY-REM | 선형온도센서 데이터수집장비 | This product measures temperature based on the temperature sensor equipped with one-wire communication function (DY-LTS). It is simple to install despite the large number of detection sensors, consuming only a small amount of power. Another strength of this product is that various problems (short, sensor failure) can be detected. | ||||||
Temperature indicator Transmitter | DY-T10 | Local Indicating Digital Temperature Transmitter | This is a high-precision temperature transmitter with built-in microprocessor. Using a control key at the front, various functions can be controlled with ease. In addition, it transmits an RTD (PT 100 Ohm) input as 4 - 20mA output. Temperature range and zero point adjustment can be executed on site. The 4-digit LED indicator shows the temperature values measured in the field. The current signals are concurrently transmitted to another receiver. | ||||||
Pressure indicator Transmitter | DY-P10 | Local Indicating Digital Pressure Transmitter | This is a high-precision pressure transmitter with built-in microprocessor. Using a control key at the front, various functions can be controlled with ease. The piezoresistive ceramic/silicon element enables efficient process management at low cost and measuring of even highly corrosive media. The measurements are displayed as a 4-digit value on the LED screen. The current signals also enable long-range transmission. | ||||||
Duct, instrument shelter-type thermo-hygrometer | DY-HTT1 | HUMIDITY / TEMPERATURE TRANSMITTER | This is a device that converts the humidity and temperature values measured with a duct, instrument shelter-type thermo-hygrometer into electrical signals and transmits the signals. | ||||||
Room-type thermo-hygrometer | DY-HTT2 | ROOM Type HUMIDITY / TEMPERATURE TRANSMITTER | This is an FND indicator that enables users to check humidity and temperature levels on site. It also converts the humidity and temperature values into electrical signals and transmits the signals. |